Lorex LNR300 Instruction Manual page 175

3 Connect the power and data cables to the hard drive.
Hard drive power
connector
Power cable
4 Turn the NVR over and insert 4 screws to secure the hard drive. Make sure to hold the hard
drive in place while turning the NVR to avoid damaging the NVR.
5 Turn the NVR back over and replace the cover. Replace the side panel and rear panel screws.
Appendix B: Installing or Replacing the Hard Drive
Insert 4 screws to the bottom
panel to secure the hard drive
Hard drive data port
Data cable
157