Configuration; General; Setting The Display Resolution; Setting The Mouse Pointer Speed - Lorex LNR300 Instruction Manual

Configuration

Configuration
Configure system and network settings.
The Configuration Menu contains the following sub-menus:

• General

• Network
• Live View
• Warning
• User
General
• For instructions on setting the date and time, see "Setting the Date and Time" on page 19.
• For instructions on enabling system passwords or configuring user accounts, see "Managing
Passwords" on page 38.

Setting the Display Resolution

You can set the display resolution for your VGA or HDMI monitor.
To set the display resolution:
1 Right-click and click Menu.
2 Enter the system user name (default: admin) and password (default: 000000) and click Yes.
3 Click Configuration.
4 Under Resolution, select the correct resolution for your monitor.
5 Click Apply to save changes. The resolution will update. Click OK to confirm.
NOTE: If you do not click OK within 15 seconds, the resolution will reset to the previously selected
setting.

Setting the Mouse Pointer Speed

1 Right-click and click Menu>Configuration.
66
Select the correct resolution for your
monitor