Using The On-Screen Display; Using The Camera Toolbar; Using Digital Zoom - Lorex LNR300 Instruction Manual

Using the On-Screen Display

Using the On-Screen Display
Use the system's graphical on-screen display to navigate menus and configure options and
settings.

Using the Camera Toolbar

The Camera Toolbar allows you to quickly access key controls for each camera.
To use the Camera Toolbar:
1 In live view, click inside the camera to open the Camera Toolbar.
Open Quick
Playback
Start/Stop
Recording

Using Digital Zoom

Zoom Mode allows you to zoom in on an image while viewing your cameras live. This can
be useful if you want to get a closer look at a situation.
To use Digital Zoom:
1 If you are in split-screen click on the camera you would like to zoom in on to open the Camera
Toolbar.
2 Click to open Digital Zoom. Digital Zoom opens to the default zoom level. The box in the
bottom right-corner of the screen shows the entire image as seen by the camera.
3 To change the zoom area, click and drag inside the box in the lower right corner.
16
Not supported
Mute
Digital Zoom
Volume /
Unmute
Image Settings
Live View
Strategy
Click and drag to
change the zoom area
Close
Camera
Toolbar