Drive; Restore Default Settings - Lorex N4K2-86BB User Manual

17 Using the Main Menu
To save your system configuration to a USB thumb drive:
1. From the Live View display, right-click to open the Quick Menu, then click Main Menu.
2. Click INFORMATION. Click theUpdate/Reset on the side panel, then click the Config
Backup tab on the top panel.
3. Under Device Model, select the USB device where you would like to save the configuration.
4. Click EXPORT to save your current system configuration.
To restore a saved system configuration:
1. From the Live View display, right-click to open the Quick Menu, then click Main Menu.
2. Click INFORMATION. Click the Update/Reset tab on the side panel, then click the Con-
fig Backup tab on the top panel.
3. Under Device Model, select the USB device where the system configuration is saved.
4. Click the folder with the configuration file you would like to restore. Configuration file fold-
ers are labeled "Config" and then the time and date the configuration was saved (e.g., Con-
fig_20140425103727).
5. Click Import to restore the system configuration.
6. Click OK to confirm. The system will restart to complete the operation.

17.5.10 Restore Default Settings

Restore the system to its default settings.
#LX400113; r. 9.0/57192/57197; en-US 70