Modifying An Nvr; Deleting An Nvr; Configuring An Nvr Through Device Management; Information - Lorex LNR300 Instruction Manual

Client Software for PC or Mac

Modifying an NVR

1 Click the NVR you would like to modify and click Modify.
Click Modify
Click the NVR
2 Change the connection info as needed and click Modify.

Deleting an NVR

• Click the NVR you would like to delete and click Delete. Click Yes to confirm.
Click Delete
Click the NVR

Configuring an NVR Through Device Management

You can configure your NVRs settings through the client software.
To configure NVR settings:
• From the Control Panel, click
• Click the NVR you would like to configure and click Remote Configuration. See below for
details on available settings.
Click Remote Configuration
Click the NVR

Information

The Information sub-menu shows system information about the NVR.
110
.