To configure your NVR's system ports:
1
Select the General tab.
2
Configure the following:
• Device Port: Enter the desired Client port (default: 8000).
• HTTP Port: Enter the desired HTTP port (default: 80).
• RTSP Port: Enter the desired Mobile port (default: 1025).
3
Click Save to save changes.
User
The User sub-menu allows you to configure user accounts on the NVR.
Adding Users
1
Click Add.
2
Under User Name, enter the user's account name.
3
Under Password and Confirm, enter the user's password.
4
At the bottom of the screen, select permissions that will apply to the user account.
5
Click Yes to save the user account.
Enter Password
Select permissions
Client Software for PC or Mac
Click Add
Enter User Name
Click Yes
113