Upgrade Firmware Using Usb Drive - Lorex LNR300 Instruction Manual

Maintenance
3 Click Maintenance. Then, click Upgrade.
4 Click the Auto Upgrade tab.
5 Click Check Update. The NVR will check online for a firmware upgrade. If a firmware upgrade
is found, click Yes to upgrade the firmware.
6 Wait for the firmware upgrade to complete. Do not disconnect the power or remove the USB
flash drive during the firmware upgrade. The NVR will reboot once the firmware upgrade is
completed.
To upgrade firmware using a USB drive:
1 In your web browser, visit
your NVR (check the label underneath your NVR for the model number). Download the free
firmware upgrade if one is available.
2 Insert a blank USB flash drive (not included) into your computer. Extract the firmware file and
copy it to the flash drive.
3 Insert the USB flash drive in one of the USB ports on the front or rear panel of the NVR.
4 Right-click to open the Quick Menu and select Menu.
5 Enter the system user name (default: admin) and password (default: 000000) and click Yes.
6 Click Maintenance. Then, click Upgrade.
80
www.lorextechnology.com
Click Check Update
and search for the model number of