Tamper-Proof; Configuring Tamper-Proof Alarms - Lorex LNR300 Instruction Manual

Camera
To configure privacy masks:
1 Right click and click Menu.
2 Enter the system user name (default: admin) and password (default: 000000) and click Yes.
3 Click Camera>Privacy Mask.
4 Under Camera, select the camera you would like to configure.
5 Check Enable Privacy Mask to enable privacy masks or un-check to disable.
6 Click and drag on the image to add privacy masks. You can configure up to 4 privacy masks
per camera.
• Click the Clear buttons if you need to delete a privacy mask.
7 Click Apply to save changes.

Tamper-proof

Configuring Tamper-proof Alarms

Tamper-proof alarms occur if an intruder attempts to tamper with the camera by covering
the lens.
To configure tamper-proof alarms:
1 Right click and click Menu.
2 Enter the system user name (default: admin) and password (default: 000000) and click Yes.
3 Click Camera>Tamper-proof.
4 Under Camera, select the camera you would like to configure.
5 Check Enable Tamper-proof to enable tamper-proof alarms or un-check to disable.
62
Check to enable privacy masks
Click and drag to add privacy mask areas