Warning; Configuring System Warnings - Lorex LNR300 Instruction Manual

Configuration
4 Click
5 Click inside the boxes to select an area of the screen. Double-click a camera to display it in
the selected box. This camera will replace the camera previously shown in this area.
NOTE: You can not display a camera more than once on the screen.

6 Click to select different pages.
7 Click Apply to save changes. Right-click repeatedly to return to live view. When you select this
split-screen configuration, the channels will be shown according to your arrangement.

Warning

Configuring System Warnings

You can configure the types of actions the system will take when errors occur.
To configure system warnings:
1 Right-click and then click Menu.
2 Enter the system user name (default: admin) and password (default: 000000) and click Yes.
3 Click Configuration>Warning.
4 Under Warning type, select All to configure all warnings, or select one of the following types
to configure:
• HDD Full: The hard drive is full.
• Hard Drive Error: Error encountered while writing to the hard drive or hard drive not
formatted.
• Network Disconnected: NVR disconnected from network.
• IP Conflicted: IP address of camera or NVR duplicated.
• Illegal Login: Wrong user name or password entered.
• Record Exception: No space for saving recorded files.
74
to select a different split-screen configuration.
Double-click to display a camera in
the selected screen area
Click to select an area of the screen