Advanced Menu; Manual Firmware Upgrade; Restoring Default Settings - Lorex LHB926 Series Instruction Manual

Hide thumbs Also See for LHB926 Series:

Table of Contents

Using the Main Menu

13.4 Advanced Menu

Perform firmware upgrades, manage system events and warnings, load default settings, and save/

load current system settings.

The system supports automatic firmware upgrades over the network to ensure your unit is always

up-to-date. It is recommended to always use automatic upgrade unless directed to perform a man-

ual upgrade by technical support.

Prerequisites:

• Save the .bin firmware upgrade file in the root folder of a USB flash drive (not included), and

connect the drive to one of the USB ports on your recorder.

To manually upgrade the recorder's firmware:

1. From the live viewing screen, click

> Advanced > Maintenance.

2. Click Firmware Upgrade.

3. The drive menu appears. Navigate to and select the .bin firmware file, then click OK.

4. A confirmation window appears. Click OK to confirm.

5. Allow 5-10 minutes for the system to upgrade and reboot.

CAUTION

Do not power off therecorder during firmware upgrade.

Reset the recorder settings to their out-of-box state. You can choose to reset all settings at once, or

just settings on specific menus. Restoring default settings will not delete recordings and snapshots

saved to the hard drive.

#LX400109; r. 2.0/54857/55689; en-US

Table of Contents

Show Quick Links

Table of Contents