Using The Virtual Keyboard - Lorex LNR300 Instruction Manual

Using the On-Screen Display
• Single Screen: Open a camera in full screen.
• Multi-Screen: Select a split-screen layout.
• Previous Screen: Select the previous channel or group of channels (e.g. if 2x2 Multi-Screen
is selected, click Previous Screen to see the next 4 channels).
• Next Screen: Select the next channel or group of channels.
• Start/Stop SEQ: Start/stop Sequence Mode (NVR automatically changes channels every few
seconds.
• Start Recording: Select Continuous & Motion Record to start 24/7 continuous and motion
recording on all channels. Select Motion Detection Record to start 24/7 motion detection
recording on all channels.
• All-day Playback: Open Playback Mode for the currently selected channel. For details, see
"Using All-day Playback" on page 23.
• Output Mode: Click to adjust the color output mode for your monitor. Select the color output
mode that looks best on your monitor: Standard, Bright, Gentle, or Vivid, and then click OK.
• Information: Click to access system information.
• Disable Beep: Disables the system beep for alarms until the next alarm occurs.

Using the Virtual Keyboard

You can input numeric or text values using the on-screen virtual keyboard. You will need to
use the Virtual Keyboard when entering your User Name and Password.
To use the Virtual Keyboard:
1 Click on a menu option the requires text input.
• The Virtual Keyboard opens.
Enter special
characters
Toggle uppercase /
lowercase
2 Enter your text entry and then press Enter.
18
Space Confirm
Input
Backspace