Setting The Monitor Resolution (Display); Saving Your System Configuration To A Usb Flash Drive - Lorex LHV2000 Series Instruction Manual

15 Using the Main Menu
3. Click OK to save changes.

15.3.20 Setting the Monitor Resolution (Display)

The Display menu allows you to configure the systems monitor resolution and other dis-
play settings.
To set the monitor resolution:
1. From the Main Menu, click
2. Under Resolution, select the correct resolution for your monitor: 1920x1080,
1280x1024, 1280x720, or 1024x768.
3. Click OK to save changes. Click OK again to restart the system using the new
resolution.
To configure other display settings:
1. From the Main Menu, click
2. Configure the following:
• Transparency: Select the menu transparency.
• Time Display: Check to show the time on the monitor.
• Channel Display: Check to show the channel names on the monitor.
• Image Enhance: Check for the system to digitally improve the video quality on
the live display. This setting does not affect recordings.
3. Click OK to save changes.

15.3.21 Saving Your System Configuration to a USB Flash Drive

The system allows you to save your current system configuration to a USB flash drive
(not included). This is useful if you want to backup your current settings.
#LX400060; r.30328/35049; en-US
and then click Setting>Display>Display.
and then click Setting>Display>Display.
68