Saving Your System Configuration To A Usb Thumb Drive - Lorex N862A63B User Manual

17 Using the Main Menu
To access the network test menu:
1. From the Live View display, right-click to open the Quick Menu, then click Main Menu.
2. Click INFORMATION, then click the Network tab on the side panel. Click the Network
Test tab on the top panel.

17.5.9 Saving Your System Configuration to a USB Thumb Drive

The system allows you to save your current system configuration to a USB thumb drive (not in-
cluded). This is useful if you want to backup your current settings.
NOTE
This function only saves settings created in system menus. It does not save or backup any video.
To save your system configuration to a USB thumb drive:
1. From the Live View display, right-click to open the Quick Menu, then click Main Menu.
2. Click INFORMATION. Click theUpdate/Reset on the side panel, then click the Config
Backup tab on the top panel.
3. Under Device Model, select the USB device where you would like to save the configuration.
4. Click EXPORT to save your current system configuration.
To restore a saved system configuration:
1. From the Live View display, right-click to open the Quick Menu, then click Main Menu.
#LX400113; r. 9.0/57191/57191; en-US 68