Other Functions; Formatting Usb Flash Drives - Roland VR-50HD Owner's Manual

Other Functions

Formatting USB Flash Drives

To use a USB flash drive, it must first be formatted on the VR-50HD.
NOTE
• USB flash drives not formatted using the VR-50HD are not
recognized.
• Performing formatting causes all data already saved on the USB
flash drive to be lost. Before you carry out formatting, be sure to
check whether the USB flash drive holds any data you want to
keep.
Connecting
Carefully insert the USB flash drives all the way in—until it is firmly
in place.
* Never turn off the power or disconnect the USB flash drives
while the screen indicates "Processing. "
NOTE
It may take for a while before you can operate files on a USB
flash drive after you connect the USB flash drive to the VR-50HD.
34
Formatting
1.
Display the menu screen (p . 13) .
2.
Touch System <Memory> .
The Memory screen appears.
3.
Touch USB Memory <Format> .
A confirmation prompt appears.
4.
To perform formatting, press the [ENTER] button .
To cancel, press the [EXIT] button.
5.
Press the [MENU] button to exit the menu screen .