Using Still-Image Files - Roland VR-50HD Owner's Manual

Using Still-image Files

On the VR-50HD, you can assign a still image to the VIDEO INPUT
SELECT [STILL] button and work with it in the same way as video.
You import the still-image file from a USB flash drive that you
connect to the VR-50HD.
Format and resolution of the still images
Save still-image data in the root directory of a USB flash drive, using
the format and resolution described below.
Data in other formats or sizes cannot be imported.
Format Bitmap (.bmp), 24 bits/pixel, uncompressed
Resolution Maximum 1,920 x 1,280
NOTE
Still images cannot be scaled. Before you import the image,
make sure it is already at the proper resolution for the final
format.
Importing still images
You import a still image saved on a USB flash drive into the VR-
50HD and assign it to the VIDEO INPUT SELECT [STILL] button.
NOTE
• Still images are deleted when the VR-50HD's power is turned off.
• Turning on the power while a USB flash drive containing a still
image is inserted causes the still-image file imported before the
power was turned off to be automatically imported from the
USB flash drive.
1.
Save the still-image file in the root directory of the USB
flash drive .
Use a file name containing no more than eight single-byte
alphanumeric characters, and be sure to add the ".bmp" file
extension.
2.
Connect the USB flash drive containing the saved still-
image file to the USB MEMORY port .
3.
Display the menu screen (p . 13) .
4.
Touch System <Still Load/Delete> .
The Still Load/Delete screen appears.
5.
Touch <1>–<4> to select the destination for saving the
still image .
6.
Touch <Load> .
The File Select screen appears.
7.
To select the still-image file to import, touch the name of
the file .
The display changes to green.
8.
To import, press the [ENTER] button .
To cancel, press the [EXIT] button.
Outputting a still image
1.
At the menu screen, Touch Video <Still> .
The Video Input Still screen appears.
2.
Touch <Still> to display the Still Select screen, then select
the still image you want to output .
3.
Touch the name of the file, then press the VIDEO INPUT
SELECT [STILL] button, making the button's indicator light
up .
The still image is output.
Other Functions
35