Using Phantom Power; Assigning Hdmi/Sdi Audio To Channels - Roland VR-50HD Owner's Manual

Connecting External Equipment

Using Phantom Power

NOTE
• Always turn the phantom power off when connecting any
device other than condenser microphones that require
phantom power. You risk causing damage if you mistakenly
supply phantom power to dynamic microphones, audio
playback devices, or other devices that don't require such
power. Be sure to check the specifications of any microphone
you intend to use by referring to the manual that came with it.
(This instrument's phantom power: +48 V DC, 5 mA Max)
• Phantom power is not supplied to channels 5/6–11/12.
1.
Press the [SETUP] button for the channel that requires
phantom power, making the button light up .
The channel parameter screen appears.
2.
Touch <+48 V> to set it to "ON . "
3.
Press the [EXIT] button or the illuminated [SETUP] button
to finish making the settings .
18

Assigning HDMI/SDI Audio to Channels

Channels 1–4 are exclusively for analog input, but channels
5/6–11/12 can also be assigned to audio input via HDMI or SDI.
Use the following procedure to change assignments.
1.
Press the [SETUP] button for the channel whose
assignment you want to change, making the button light
up .
The channel parameter screen appears.
2.
Touch Input <VIDEO> .
Value Explanation
LINE Line input is selected.
Depending on the input connector assigned to the
VIDEO channel, audio embedded in HDMI or SDI input is
selected.
* Audio channels 5/6–11/12 correspond respectively to video
inputs 1–4 at LINE 1–4.
* Channel 1 and channel 2 of audio embedded in the SDI or HDMI
input are input on the audio channels.
3.
Press the [EXIT] button or the illuminated [SETUP] button
to finish making the settings .