Applying Effects To Audio - Roland VR-50HD Owner's Manual

Applying Effects to Audio

On the VR-50HD, you can apply effects (Reverb, Equalizer, and
Mastering) to audio output.
1.
Display the menu screen (p . 13) .
2.
Touch Audio <Reverb/Mastering> .
The Reverb/Mastering screen appears.
3.
Touch the effect you want to use, setting it to ON .
4.
Touch the parameter, then use the [VALUE] knob to
change the setting value .
5.
Press the [MENU] button to exit the menu screen .
Reverb
This adds lingering reverberations to the sound.
Parameter Explanation
Reverb ON/OFF This switches reverb on and off.
Level
This sets the amount of reverb applied.
Time This sets the duration of the reverb.
Type
This selects the type of reverb (Room or Hall).
You can also use the [REVERB] knob on the top panel to adjust the
Level setting.
Equalizer
This adjusts the low-frequency, middle-frequency, and high-
frequency volume levels.
Parameter Explanation
Equalizer ON/OFF
This switches the equalizer on and off.
This adjusts the volume level of the high-
High
frequency.
This adjusts the volume level of the middle-
Mid
frequency.
This adjusts the volume level of the low-
Low
frequency.
Edit This displays an advanced setting screen.
Mastering
This adjusts the dynamic range and tone quality.
Parameter Explanation
Mastering ON/OFF
This switches mastering on and off.
High This suppresses high-frequency distortion.
Mid
This suppresses middle-frequency distortion.
Low This suppresses Low-frequency distortion.
This adjusts the degree of application of the
NS
noise suppressor.
This adjusts the degree of application of the
Enhancer
enhancer.
Audio Operations
33