Saving/Recalling Settings - Roland VR-50HD Owner's Manual

Saving/Recalling Settings

You can take the current settings, including the panel state, audio
settings, and video settings, and save them in the unit's internal
memory as a single set, then call them up for use when needed.
Saving settings
* Still images are not saved.
1.
Display the menu screen (p . 13) .
2.
Touch System <Memory> .
The Memory screen appears.
3.
Touch <Store>, making it light up in red .
4.
Touch the memory number (<1>–<8>) where you want to
save the settings .
The settings are saved.
MEMO
• When Auto Store is set to ON, the settings are automatically
saved at Memory No. 1 when you change the menu.
• Some parameters selected using System <Setup> (such as HDCP
and Frame Rate) are not saved at separate memory numbers.
Only a single set is saved in the unit.
For details, refer to Reference Manual (PDF).
After parameters have been set, they are automatically saved
when you change the menu screen.
• A memory number for which the Memory No. text is displayed
in black has never had values saved to it. Recalling such a
memory number calls up default values.
Recalling settings
* The settings at Memory No. 1 are called up automatically at
power-up.
1.
Display the menu screen (p . 13) .
2.
Touch System <Memory> .
The Memory screen appears.
3.
Touch <Recall>, making it light up in green .
4.
Touch the memory number (<1>–<8>) whose settings you
want to call up .
The settings are recalled.
NOTE
Screen corruption occurs when settings are recalled
When settings in memory are recalled, corruption of the output
video occurs when the input connectors are switched or the
output format changes (p. 42).
Other Functions
39