Returning To The Factory-Default Settings (Factory Reset) - Roland VR-50HD Owner's Manual

Returning to the Factory-default
Settings (Factory Reset)
You can return the settings on the VR-50HD to their factory-default
values.
This is called a "factory reset. "
NOTE
Performing a factory reset causes all user data saved in the unit
to be lost. Before you perform this operation, check whether
there is any data you want to keep.
1.
Display the menu screen (p . 13) .
2.
Touch System <Setup> .
The System screen appears.
3.
Touch < > or < > to change to the screen where
"Factory Reset" is displayed .
4.
Touch <Factory Reset> .
A confirmation prompt appears.
5.
To carry out the factory reset, press the [ENTER] button .
To cancel, press the [EXIT] button.
NOTE
• Be very sure never to turn off the power while "Processing. " is
displayed.
• Default setting of the system frame rate is 59.94 Hz.
When you want to operate in the Frame Rate of 50 Hz, you
can set it at the System screen (refer to the "Reference Manual"
(PDF)).
Other Functions
41