Changing The Screen Labels; Changing The Video Output Bus; Assigning An Output Bus To Video Connectors - Roland VR-50HD Owner's Manual

Changing the Screen Labels

By default, labels like the one shown below are displayed at the
bottom of the screen for each channel.
Example: When the MONITOR [MULTI-VIEW] button is lighted
You can use the following procedure to change each channel's label
to a text string you choose (up to 8 characters).
1.
Display the menu screen (p . 13) .
2.
Touch System <Setup> .
The System screen appears.
3.
Touch < > or < > to switch the screen, then touch
<Label> .
The Label screen appears.
4.
Touch the label you want to change to display the input
screen, then enter the characters .
Touch < > or < > to move the cursor, and use the [VALUE]
knob to select characters.
Insert Insert a space at the cursor position.
Delete Delete the character at the cursor position.
5.
When you've finished entering the text, press the [ENTER]
button to apply it .
Pressing the [EXIT] button cancels text entry.

Changing the Video Output Bus

This specifies what video signals are output from the respective
video output connectors.

Assigning an Output Bus to Video Connectors

1.
Display the menu screen (p . 13) .
2.
Touch Video <Output> .
The Video Output screen appears.
3.
Touch < > or < > to change to the screen where
"Output Bus" is displayed .
4.
Select the output bus to assign to the respective output
connectors by touching one of the buttons from <PGM>–
<AUX> .
Value Explanation
The PGM bus is assigned.
PGM
This is the final video signal processed by the VR-50HD
itself.
The PVW bus is assigned.
PVW
This is a video signal allowing previewing of the results
up through video compositing.
The AUX bus is assigned.
AUX
This is the video signal selected using AUX Bus Source.
5.
Press the [MENU] button to exit the menu screen .
Other Functions
37