Audio Operations; Adjusting The Input Gain (Sensitivity) - Roland AeroCaster VRC-01 Owner's Manual

Audio Operations

Audio Operations
This section explains about the audio-related operations for this unit.
â
Adjusting the Input Gain (Sensitivity)(P.22)
â
Adjusting the Volume Balance(P.24)
â
Removing Noise from an Audio Signal (Noise Gate)(P.25)

Adjusting the Input Gain (Sensitivity)

Adjust the input gain of MIC 1 or MIC 2 so that the audio input is at an appropriate level.
1. Move the [MIC 1] or [MIC 2] fader to a position near the thick lines on the level scale.
2. Move the [MAIN] fader to a position near the thick lines on the level scale.
3. Turn the [MIC 1] or [MIC 2] knob fully counter-clockwise, minimizing the input gain.
4. While producing the sound that is actually going to be input, slowly turn the [MIC 1] or [MIC 2] knob
clockwise to adjust the input gain.
Raise the input gain as high as possible without letting the SIG/PEAK indicator for MIC 1 or MIC 2 light up red at the loudest
sound level.
22