The Printer Stops During A Print Job - Canon iPF6300 User Manual

Troubleshooting

The printer stops during a print job

An error message is shown on the Display Screen ................................................................................... 888
The printer ejects blank, unprinted paper .................................................................................................. 888
An error message is shown on the Display Screen
An error message is displayed during printing.
The last portion of roll paper was used during a print
job, and paper could not be advanced because the
trailing edge is taped to the roll.
The printer ejects blank, unprinted paper
The leading edge of the roll paper
was cut to straighten it.
The Printhead nozzles are clogged.
A print job was received from an
incompatible printer driver.
11
The printer is damaged.
888
An error message is shown on the Display Screen
> The printer stops during a print job
Status
Status
The leading edge of rolls may be cut to straighten it if you have selected
Trim Edge First > On or Automatic in the Control Panel menu.
(See "Cutting the Leading Edge of Roll Paper Automatically.")
Print a test pattern to check the nozzles and make sure the Printhead is in
good condition for printing.
(See "Checking for Nozzle Clogging.")
Use the correct imagePROGRAF printer driver for the printer and try printing
again.
Contact your Canon dealer for assistance.
>
Corrective Action
Check the error message and take action as necessary.
(See " Error Messages
Remove the used roll and insert a new roll.
(See "Removing the Roll from the Printer.")
(See "Removing Rolls From the Roll Holder.")
(See "Loading and Printing on Rolls.")
Corrective Action
.")
→P.909
→P.679
→P.681
→P.3
→P.690
→P.847
iPF6300