6-5 Setting How the Printer Operates
Determining What Happens When an Ink Cartridge Is Empty
Procedure
MENU
SUB MENU
SUB MENU
INK CONTROL
EMPTY MODE
STOP
CONT.
W 1346mm
SETUP SHEET
ROLL
Description
This lets you change, according to your purpose, the operation that takes place when an ink cartridge is empty.
"STOP" immediately pauses operation when a cartridge becomes empty. Because pausing printing in progress may
make colors uneven, it is best to ensure a sufficient amount of remaining ink before you begin printing.
"CONT." (continue) is a mode in which operation is not automatically stopped. When a cartridge becomes empty, a
warning beep sounds but printing doesn't stop. To replace the cartridge, you must either wait until printing ends or
press
to pause printing. Note that operation does not stop even if ink runs out completely.
Default Setting
[EMPTY MODE]: STOP
Changing the Type of Ink
Procedure
MENU
SUB MENU
SUB MENU
INK CONTROL
INK CONTROL
CHANGE INK SET
CHANGE INK SET
E-SOL Max LcLm
Description
You use this when changing the type of ink. Selecting the type of ink used for replacement starts head-cleaning and
ink-filling operations. Follow the on-screen instructions to insert and remove cartridges.
This operation requires four unused cleaning cartridges.
Press
.
Press
several times.
Press
.
Press
twice.
Press
twice.
Use
to make the setting.
Press
to enable the setting.
Press
.
Press
to go back to the original screen.
Press
.
Press
several times.
Press
.
Press
twice.
Press
.
Press
.
Press
.
Use
to make the setting.
Press
to execute the setting.
Chapter 6 Feature Reference
91