Siemens Gigaset talk & surf 6.0 Operating Instructions Manual page 146

Device type
The specification of the device type is only necessary for GAP devices and devices on
an analogue connection. The connection settings for the base station are adapted
to the device type of the device in question.
The following device types are available:
Device type
Phone
Fax
Modem
Local Answering Machine Answering machine
Neutral
Door 1
Door 2
External music on hold
no function
Authorisation
Use Authorisation to define which connections can be received or called by a
device.
The following authorisations are available:
Authorisation
Unrestricted
Incoming only
Internal only
Send MSN
The Send MSN is the MSN with which a device sets up a connection. This MSN is dis-
played to external participants if the Withhold no. option in the ISDN Settings dia-
logue has not been activated.
You can assign several devices the same MSN as the Send MSN. For each device,
however, only one Send MSN can be preset at any one time.
The Send MSN selection after seizure option allows you to decide that the Send
MSN for certain devices has to be chosen before the connection is set up.
Connected device (examples)
Telephone
Fax machine
Modem connection PC (internal or external)
Multifunctional machine (telephone / fax / answering
machine)
Door intercom as per FTZ 123, door opener via closed-
circuit current
Door intercom with operation via DTMF control codes
Hi-Fi system, MP3 player
Connection deactivated
Connection type
Receive
Call
Call
Call
Folders and Dialogues
Network
Internal and external call numbers
Internal and external call numbers
Internal numbers,
externally only emergency numbers
Internal numbers only
Internal numbers,
externally only emergency numbers
143