Installing The Software And Device Drivers - Siemens Gigaset talk & surf 6.0 Operating Instructions Manual

Installing the software and device drivers

The talk&surf wizard will guide you through the installation of talk&surf and other soft-
ware components. The number and kinds of installation steps depend on your base sta-
tion features and the devices and functions you want to use with your base station.
As a rule, the following steps are required for installing talk&surf:
1. Preparing the base station for use
2. Uninstalling old versions of talk&surf and device drivers
3. Inserting the talk&surf CD and running the talk&surf wizard
4. Rebooting the PC
5. Setting up further components as required
After successful installation you can launch talk&surf and configure your base station.
Further information
"Operating with other devices" on page 169
"Notes on operation" on page 23
"Notes on the operating instructions" on page 6
"Safety precautions" on page 6
Installing the software and device drivers
13