Table of Contents
Advertisement
Configuring the base station
Configuring preferred redirection location
A call can be redirected in your base station or on the network.
ì
Double-click Configuration in Folder List.
This displays the dialogues available.
ì
Click Base settings.
The corresponding tabs are then displayed.
ì
Open the Assignments tab.
ì
Define the Preferred redirection location:
– Click In the base, if you want the base station to redirect the call.
The second B-channel of the ISDN line will be used for redirecting calls.
ì
The base station can only redirect the call if the second B-channel is
i
free. If this is not the case, then the caller will hear the busy tone.
or
– Click In the network, if you want the call to be redirected on the network.
The base station then sends the destination telephone numbers for each call for-
ward to your network provider. This will leave both B-channels of your ISDN line
free when a call is forwarded. You can activate several call forward numbers at
the same time.
ì
Click Apply.
The new settings will be sent to the base station.
Detailed description
"Base settings" on page 153
Further information
"Configuring the date and time" on page 59
"Configuring preferred holding for enquiry calls" on page 61
"Assigning a device for PC dialling" on page 63
"Deleting log lists" on page 65
"Restoring factory settings" on page 66
"Changing the system PIN" on page 67
"Activating the waiting melody" on page 68
60
Advertisement
Table of Contents
