Table of Contents
Advertisement
Replacing the answering machine pre-recorded
announcements
Only available for Gigaset SX255isdn and Gigaset SX353isdn.
Pre-recorded announcements can be replaced using the phrase down-
!
load tool only via the USB direct connection.
The pre-recorded announcement for your answering machine has been preset for the
country in which your base station is sold. If you want to play your pre-recorded
announcements in a different language, you will have to change this default setting.
With the phrase download tool you can select a different language variant and transfer
it to your base station. This overwrites the existing pre-recorded announcements, but
they can be restored at any time by re-running the phrase download tool.
General information about the phrase download tool
The phrase download tool is not installed with talk&surf because this application
u
does not require installation.
Run the phrase download tool with psdlt.exe, which you will find in the Tools folder
on the talk&surf CD.
Pre-recorded announcements can be replaced only via the USB connection. If the
u
base station is operated via a wireless connection (e. g. Gigaset USB Adapter DECT),
you will have to use the connection wizard to change the connection.
Under Windows 2000 and Windows XP you must have administrator rights. If nec-
u
essary, contact your system administrator.
Make sure that the power supply and the USB connection are not interrupted during
u
the transfer process.
Running the phrase download tool
ì
Open Windows Explorer.
ì
Select the Tools folder on the talk&surf CD.
ì
Double-click psdlt.exe to launch the phrase download tool.
ì
Select the appropriate language.
ì
Click Next.
This loads the selected answering machine phrase to the base station. The old
announcement is overwritten. The progress of the phrase download is shown in a
progress bar.
ì
After the download is completed, click Finish.
This closes the phrase download tool.
Notes on operation
27
Advertisement
Table of Contents
