Turning On/Off And Initial Mode; Turning On And Off; When The Copier Is Turned On; Inital Mode - Minolta EP1030 User Manual

2.3 Turning ON/OFF and Initial Mode

2.3

Turning ON/OFF and Initial Mode

2.3.1

Turning ON and OFF

1 Turning Copier ON. Press the
Main Switch to the e (ON)
position.
Turning Copier OFF. Press the
Main Switch to the d (OFF)
position.
NOTE
If the copier has not been used in the past 30 minutes, the Auto Power Off
function turns the copier off. (See page 13.)
2.3.2

When the Copier is Turned ON

The LED in the start key will remain off while the copier makes
preparations for copying. After approximately 10 seconds, the LED in the
start key will come on and copying can be started. At this time, if an
original is placed in the Semi-automatic Document Handler (SDH), the
copier will be set into SDH mode copying.
2.3.3

Inital Mode

The copy mode will be displayed on the control panel when the Main
Switch is turned on. This is called the initial mode. This is the mode that
forms the basis for all control operations.

Number of Copies: 1

Copy Density: Auto Exposure
EP1030/EP1030F 12 Rev. 1.x/22.05.02