Replacing The System Battery - HP Integrity rx6600 User's & Service Manual

Figure 78 Battery Location on I/O Board
Core I/O Board Slot
1
I/O VRM
2

Replacing the System Battery

CAUTION:
and replacement of the I/O board assembly occurs through the rear of the rack for rack-installed
servers. Carefully follow the removal and replacement procedures; you must perform several tasks
with the server extended out the front of the rack. See
Assembly" (page 223)
1. Insert the replacement battery into the socket on the I/O board assembly.
IMPORTANT:
engaged.
NOTE:
with the + sign facing up.
228 Removing and Replacing Server Components
3
You must remove the I/O board assembly to service the system battery. The removal
for complete instructions.
Ensure that the new battery is fully seated and that all locking tabs are correctly
The positive terminal of the battery is designated by the + sign. Install the battery
TPM
"Removing and Replacing the I/O Board
System Battery
4