HP Integrity rx6600 User's & Service Manual page 291

IO Timeouts for Sequential Devices
IO Timeouts for Other Devices
LUNs to Scan for Block Devices
LUNs to Scan for Block Devices
(Removable)
LUNs to Scan for Sequential Devices Controls LUN scans for the following devices:
LUNs to Scan for Other Devices
Spinup Properties Screen
To access Spinup Properties, press Enter on the Spinup Properties field from the Advanced Adaptor
Properties screen. This screen enables you to view and modify spin up specific settings.
Spin up refers to the disk drives getting up to rotation speed during system boot. To reduce the
power requirement stress on the backplane, a delay is introduced between drive spin ups.
Direct Attached Spinup Delay
Direct Attached Max Targets
Specifies the time (Time in seconds (0-999, 0 means
no-timeout)) which the host uses to timeout I/Os for the
following devices:
SCSI Device Type 01h - Sequential Access
Specifies the time (Time in seconds (0-999, 0 means
no-timeout)) which the host uses to timeout I/Os for devices
other than:
SCSI Device Type 00h - Direct Access
SCSI Device Type 01h - Sequential Access
SCSI Device Type 04h - Write Once
SCSI Device Type 05h - CD-ROM
SCSI Device Type 07h - Optical
SCSI Device Type 0Eh - Simplified Direct Access
Controls LUN scans for the following devices with
Non-Removable Media:
SCSI Device Type 00h - Direct Access
SCSI Device Type 04h - Write Once
SCSI Device Type 07h - Optical
SCSI Device Type 0Eh - Simplified Direct Access
Controls LUN scans for the following devices with Removable
Media:
SCSI Device Type 00h - Direct Access
SCSI Device Type 04h - Write Once
SCSI Device Type 05h - CD-ROM
SCSI Device Type 07h - Optical
SCSI Device Type 0Eh - Simplified Direct Access
SCSI Device Type 01h - Sequential Access
Controls LUN scans for all devices other than the following:
SCSI Device Type 00h - Direct Access
SCSI Device Type 01h - Sequential Access
SCSI Device Type 04h - Write Once
SCSI Device Type 05h - CD-ROM
SCSI Device Type 07h - Optical
SCSI Device Type 0Eh - Simplified Direct Access
Time, in seconds, between each disk drive spin up spin up
(default 3 seconds).
Number of disk drives that spin up at the same time (default
1 drive).
HP 8 Internal Port SAS HBA (SAS Controller) 291