Booting Hp-Ux In Lvm-Maintenance Mode; Shutting Down Hp-Ux - HP Integrity rx6600 User's & Service Manual

6. Exit the console and iLO 2 MP interfaces when finished using them.
a. Press Control-B to exit the system console and return to the MP Main Menu.
b. To exit the iLO 2 MP, enter X at the MP Main Menu.

Booting HP-UX in LVM-Maintenance Mode

To boot HP-UX in LVM-maintenance mode, follow these steps:
1. Access the EFI Shell environment for the system on which you want to boot HP-UX in
LVM-maintenance mode.
a. Log in to the iLO 2 MP and enter CO to select the system console.
b. Confirm that you are at the EFI Boot Manager menu. If you are at another EFI menu, select
Exit from the submenus until you return to the screen with the EFI Boot Manager heading.
c. From the EFI Boot Manager menu, select the EFI Shell to access the EFI Shell environment.
2. Access the EFI System Partition (fsX: where X is the file system number) for the device from
which you want to boot HP-UX.
3. Issue the HPUX command to initiate the \EFI\HPUX\HPUX.EFI loader on the device you
are accessing.
4. Press any key within the 10 seconds given for interrupting the HP-UX boot process. This stops
the boot process at the HPUX.EFI interface (the HP-UX Boot Loader prompt, HPUX>).
5. At the HPUX prompt, enter the boot -lm vmunix command to boot HP-UX in
LVM-maintenance mode.
6. Exit the console and iLO 2 MP interfaces when finished using them.
Press Control-B to exit the system console and return to the MP Main Menu. To exit the iLO 2
MP, enter X at the MP Main Menu.

Shutting Down HP-UX

Use the shutdown command to shut down HP-UX running on a system, .
For more information see the shutdown(1M) manpage and the following procedure:
To shut down the HP-UX operating system, follow these steps:
1. Log in to HP-UX running on the system that you want to shut down.
Log in to the iLO 2 MP for the server and use the Console menu to access the system console.
Accessing the console through the iLO 2 MP enables you to maintain console access to the
system after HP-UX has shut down.
2. Issue the shutdown command with the appropriate command-line options.
The command-line options you specify dictate the way in which HP-UX shuts down, and whether
the system is rebooted.
To shut down HP-UX and halt (power off) the system, issue the shutdown -h command.
To reboot a halted system power on the system using the PC command at the iLO 2 MP
Command menu.
To shut down HP-UX and reboot the system, issue the shutdown -r command.
124 Booting and Shutting Down the Operating System