Configuration Utility Screens; Drvcfg Screens - HP Integrity rx6600 User's & Service Manual

Esc
Enter

Configuration Utility Screens

All SAS BIOS configuration utility screens contain the following areas, starting at the top of the
screen:
Header area
Menu area
Main area
Footer area
Figure 90 provides a map of how screens are accessed in the DRVCFG utility.
Figure 90 Accessed Screens in the DRVCFG Utility

DRVCFG Screens

Adapter List Screen
The Adapter List screen displays when the configuration utility is first started. This screen displays
a scrolling list of up to 256 SAS controllers in the system, and information about each of them.
Use the arrow keys to select a SAS controller, and press Enter to view and modify the selected
SAS controller's properties.
You can view and modify the SAS controller whether it is enabled or disabled. You can use the
Boot Support setting in the Adapter Properties menu to change the status of this setting. You must
reconnect the EFI Driver in order for a new Boot Support setting to take effect.
The following are the descriptions for the Adapter List screen.
Adapter
PCI Bus
PCI Dev
PCI Fnc
FW Revision
280 Core I/O Card Utilities
Abort/Exit - Escape aborts the current context operation and/or exits the current
screen. User confirmation is solicited as required if changes have been made by
user. If you are using a serial console, pressing Esc causes a delay of several
seconds before it takes effect. This is normal system behavior and is not an error.
Execute <item> - Executable items are indicated by highlighted text and a different
background color. Press Enter to execute the field's associated function.
Identifies the utility and version number.
Gives the title of the current screen, and on screens other than the Adapter List
screen also identifies the adapter.
The main area for presenting data. This area has a cursor for item selection,
and horizontal and vertical scroll bars if necessary.
Provides general help information text.
Indicates the specific SAS Controller type.
Indicates the PCI Bus number assigned by the system BIOS to an adapter (0x00
- 0xFF, 0 - 255 decimal)
Indicates the PCI Device assigned by the system BIOS to an adapter (range
0x00 - 0x1F, 0 - 31 decimal)
Indicates the PCI Function assigned by the system BIOS to an adapter (range
0x00 - 0x7, 0 - 7 decimal)
Displays the Fusion MPT firmware version and type (IR or IT)