HP Integrity rx6600 User's & Service Manual page 331

1. To map the parameters for all PCI cards installed in the system, enter the shell> info io
command at the EFI Shell prompt. A list of all the devices that are installed in the server and
managed by EFI drivers displays. For example:
Seg Bus Dev
# #
--- --- ---
00 00
00 00
00 00
00 00
00 00
00 20
00 20
00 20
00 40
00 40
00 80
00 E0
00 E0
00 E0
In this example, a single SCSI interface is listed.
For each channel of the SCSI board, note certain information. For example, look at the
information for the SCSI interface. For each channel of this SCSI interface, note the following
information:
Bus #: Identifies the bus the device is on. This is the same for both channels. In this
example, the bus number is 20.
Dev #: The ID the device is assigned on the bus. This is the same for both channels. In
this example, the SCSI interface is device 01.
Fnc #: Identifies the channel of the device (00 for channel A, 01 for channel B, and so
on). In this example, because the SCSI interface has two channels, one channel is 00
and the other is 01.
Vendor ID: Shows the device vendor ID. This is the same for both channels. For all
SCSI interfaces, the ID is 0x1000.
Device ID: Shows the device ID. This is the same for both channels. In this example,
the SCSI interface the ID is 0x0030.
Slot #: Identifies the physical card slot in the system where the SCSI interface is installed.
This is the same for both channels. In this example, the SCSI interface is on the system
board, therefore the slot number is xx.
Path: Identifies the device path. In this example, the SCSI interface path is
Acpi(HWP0002,200)/Pci(1|0) for channel A and Acpi(HWP0002,200)/Pci(1|1)
for channel B.
Fnc Vendor Device Slot
# # ID
--- ------ ------
01 00 0x1033 0x0035
01 01 0x1033 0x0035
01 02 0x1033 0x00E0
02 00 0x1095 0x0649
03 00 0x8086 0x1229
01 00 0x1000 0x0030
01 01 0x1000 0x0030
02 00 0x14E4 0x1645
01 00 0x1000 0x0021
01 01 0x1000 0x0021
01 00 0x14E4 0x1645
01 00 0x103C 0x1290
01 01 0x103C 0x1048
02 00 0x1002 0x5159
ID # Path
--- -----------
XX Acpi(HWP0002,0)/Pci(1|0)
XX Acpi(HWP0002,0)/Pci(1|1)
XX Acpi(HWP0002,0)/Pci(1|2)
XX Acpi(HWP0002,0)/Pci(2|0)
XX Acpi(HWP0002,0)/Pci(3|0)
XX Acpi(HWP0002,100)/Pci(1|0)
XX Acpi(HWP0002,100)/Pci(1|1)
XX Acpi(HWP0002,100)/Pci(2|0)
02 Acpi(HWP0002,200)/Pci(1|0)
02 Acpi(HWP0002,200)/Pci(1|1)
01 Acpi(HWP0002,400)/Pci(1|0)
XX Acpi(HWP0002,700)/Pci(1|0)
XX Acpi(HWP0002,700)/Pci(1|1)
XX Acpi(HWP0002,700)/Pci(2|0)
Specifying SCSI Parameters 331