HP Integrity rx6600 User's & Service Manual page 287

Non-IR firmware is used.
IR is disabled. The array is inactive.
Activate Array
To perform an activation of an IM array, press Enter on Activate Array. The screen prompts you
to ask if you want to perform this action. Press Y for yes or N for no.
Delete Array
To perform the deletion of the currently displayed IM array, press Enter on Delete Array. The screen
prompts you to ask if you want to perform this action. Press Y for yes and N for no.
Identifier Displays the identifier of this array.
Type Displays the RAID type.
Scan Order Displays the scan order of the array.
Size (MB) Displays the size of this array.
Status Displays the status of this array.
SAS Topology Screen
The SAS Topology screen presents a view of the adapter's SAS hierarchy, and provides other user
functionality. To access SAS Topology, press Enter on SAS Topology from the Adaptor Properties
screen.
Figure 93 SAS Topology Screen - Expander Closed
The following objects along with their significant properties are shown:
Adapter
PHYs
Expanders/Enclosures
Attached Devices
HP 8 Internal Port SAS HBA (SAS Controller) 287