HP Integrity rx6600 User's & Service Manual page 290

Figure 95 Advanced Adaptor Properties Screen
You can perform the following actions from Advanced Device Properties:
To set default values for all items on this screen, press Enter on Restore Defaults.
To toggle between LUN 0 and All in any LUN field, press + or -. LUN 0 scans only LUN 0,
All scans all LUNs.
Max Devices
Max Spin-ups
IO Timeouts
IO Timeouts (Removable)
290 Core I/O Card Utilities
Specifies the maximum number of devices attached to the
adapter for which to install a pre-OS IO interface.
Specifies the maximum number of targets that can be
simultaneously spinning up. The IOC must delay by the time
indicated in spin-up delay field before starting spin-up of
the next set of targets. A value of zero in the Maximum
Target Spinups field is treated the same as a value of one.
Specifies the time which the host uses to timeout I/Os for
the following devices with Non-Removable Media:
SCSI Device Type 00h - Direct Access
SCSI Device Type 04h - Write Once
SCSI Device Type 07h - Optical
SCSI Device Type 0Eh - Simplified Direct Access
Specifies the time which the host uses to timeout I/Os for
the following devices with Removable Media:
SCSI Device Type 00h - Direct Access
SCSI Device Type 04h - Write Once
SCSI Device Type 05h - CD-ROM
SCSI Device Type 07h - Optical
SCSI Device Type 0Eh - Simplified Direct Access