Supported Configurations - HP Integrity rx6600 User's & Service Manual

Set up alert filter options on this buffer? (Y/[N])
-------------------------------------------------------------------
E - System Event
Event Log Navigation Help:
+
-
<CR>
D
F
L
J
V
?
Ctrl-B
4. Select a, and select a threshold filter number to filter events to desired level.
MP:SL (+,-,<CR>,D, F, L, J, H, K, T, A, U, ? for Help, Q or Ctrl-B to Quit) >a
Alert Level Threshold Filter:
1 : Major Forward Progress
2 : Informational
3 : Warning
5 : Critical
7 : Fatal
Enter alert level threshold or [Q] to quit filter setup: 3
-> Alert threshold level 3 filter will be applied.
5. Select v, and select t to change the display to text mode:
Display Mode Configuration:
Current -> K - Keyword mode
Enter new value, or [Q] to Quit:
6. To decode the blinking state of system LED, review the entire SEL and look at events with alert
level 3 and above.
For example:
Log Entry 24: 14 Feb 2003 15:27:02
Alert Level 3: Warning
Keyword: Type-02 1b0800 1771520
Hot Swap Cage: SCSI cable removed
Logged by: BMC;
Data1: Device Removed/Device Absent
0x203E4D0AC6020220 FFFF0008F61B0300
Log Entry 73: 00:00:12
Alert Level 3: Warning
Keyword: Type-02 050301 328449
The server's built-in sensors have detected an open chassis door.
Logged by: BMC;
Data1: State Asserted
0x200000000C020570 FFFF010302050300

Supported Configurations

This subsection provides a system build-up procedure.
Log Name
View next block
View previous block (backward in time, e.g. from 3 to 2)
Continue to the next or previous block
Dump the entire log for capture and analysis
First entry
Last entry
Jump to entry number
View mode configuration (text, keyword, hex)
Display this Help menu
Quit and return to the Main Menu
H - Hex mode
T - Text mode
Sensor: Cable / Interconnect - SCSI ChExt Cable
Sensor: Physical Security - Chassis Open
Entries % Full
410 47 %
(forward in time,
Latest Entry
18 Feb 2003 09:38:10
e.g. from 3 to 4)
Supported Configurations 151