Ilo 2 Mp Reset Button; Core I/O Board Ports - HP Integrity rx6600 User's & Service Manual

Figure 14 Core I/O Board Controls, Ports, and LEDs
iLO 2 MP RS-232 Serial
1
Port (DB-9F to DB-9F
cable)
Connected to emulation
terminal device (PC,
laptop, or ASCII terminal)
USB 2.0 Ports
2
(any USB device)
BMC Heartbeat
3
MP Heartbeat
4

iLO 2 MP Reset Button

The iLO 2 MP Reset button enables you to reset the iLO 2 MP, and optionally reset the user-specific
values to factory default values. To soft reset the iLO 2 MP, press the button momentarily, then
release it. To soft reset the iLO 2 MP and return user-specific values to factory default values, press
the button for more than four seconds, then release it. The following values are reset to factory
default values:
Serial terminal baud rate settings
User names and passwords

Core I/O Board Ports

Table 9 lists a description of the core I/O board ports.
Table 9 Core I/O Board Ports
Port
10 Base-T/100 Base-T LAN
Auxiliary Serial
VGA Port
5
(No iLO 2 MP access; EFI
only)
General Use Serial Port
6
(Printers, etc.)
10 Base-T/100 Base-T
7
Mode LED
iLO 2 MP LAN Port
8
(10/100 LAN)
Description
LAN port dedicated for remote access to the iLO 2 MP
Local serial port.
Link and Activity LED
9
Standby Power
10
MP Self Test
1 1
Controls, Ports, and LEDs 35