Table of Contents
Advertisement
To replace the component, reverse the removal procedure.
Replacing the system battery
The system battery provides power to the internal clock. If the server no longer automatically displays the correct date and
time, you might need to replace the system battery.
WARNING: The computer contains an internal lithium manganese dioxide, a vanadium pentoxide, or an alkaline battery
pack. A risk of fire and burns exists if the battery pack is not properly handled. To reduce the risk of personal injury:
•
Do not attempt to recharge the battery.
•
Do not expose the battery to temperatures higher than 60°C (140°F).
•
Do not disassemble, crush, puncture, short external contacts, or dispose of in fire or water.
•
Replace only with the spare designated for this product.
Procedure
1. Power down the server.
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Do one of the following:
Extend the server from the rack (Extending the server from the rack).
•
Remove the server from the rack (Removing the server from the rack).
•
4. Remove the access panel (Removing the access panel).
90
Removal and replacement procedures
Advertisement
Table of Contents
