HP Integrity rx6600 User's & Service Manual page 281

Status Indicates whether the adapter is or is not eligible for software control (enabled,
disabled or error)
Enabled
Disabled
Error
Adapter Properties Screen
The Adapter Properties screen enables you to view and modify adapter settings. To scan the SAS
controller's devices, select a SAS controller and press Enter. The Adapter Properties screen displays.
Figure 91 Adapter Properties Screen
Use the arrow keys to select RAID Properties, and press Enter to view the Select New Array Type
screen.
To access the following screens, use the arrow keys to select the screen, and press Enter on the
appropriate field:
RAID Properties
SAS Topology
Advanced Adapter Properties
The following are the descriptions for the Adapter Properties screen.
Adapter Indicates the specific SAS Controller type.
PCI Address Displays the PCI Address assigned by the system BIOS to the adapter.
Indicates the EFI Driver is either currently controlling the adapter,
or will attempt to control the adapter upon reload.
Indicates the EFI Driver is either not controlling the adapter, or
will discontinue control of the adapter upon reload.
Indicates that the EFI Driver encountered a problem with the
adapter. Viewing and modifying settings for the adapter is
allowed but the information and functionality available may be
limited.
Bus value range 0x00 - 0xFF, 0 - 255 decimal
Device value range 0x00 - 0x1F, 0 - 31 decimal
Function range 0x00 - 0x7, 0 - 7 decimal
HP 8 Internal Port SAS HBA (SAS Controller) 281