Adjusting Settings Via The Operating Menu; The Main Menu "Menu - Sennheiser SR 2000 IEM - ANNEXE 1 Instruction Manual

Adjusting settings via the operating menu

Menu
Sensitivity
Mode
Easy Setup
Frequency Preset
Name
Equalizer
Auto Lock
Advanced
Exit
Menu
Sensitivity
Mode
Easy Setup
Frequency Preset
Name
Equalizer
Auto Lock
Advanced
Exit
22
Adjusting settings via the operating
menu

The main menu "Menu"

Adjusting the input sensitivity – "Sensitivity"
PEAK PEAK Menu
0 0
Exit
-10 -10
Sensitivity
-20 -20
-30 -30
Mode
-40 -40
– 18dB
AF AF
Call up "Sensitivity"
Adjustment range: 0 to –48 dB, adjustable in steps of 3 dB
Via the "Sensitivity" menu item, you can adjust the transmitter's input sensitivity to the
output signal of the audio source. The adjusted input sensitivity is common for both audio
inputs of the transmitter.
The audio level display "AF" always indicates the audio level, even if the transmitter
is muted, e.g. allowing you to check the adjusted sensitivity before live operation.
Input sensitivity
is adjusted ... Effect/display
... too high Close talking distances, speakers with loud voices or loud music
passages cause overmodulation in the transmission link.
The audio level display
the duration of the overmodulation.
... correctly The audio level display
only during the loudest passages.
... too low The transmission link is undermodulated. This results in a signal with
high background noise.
Selecting mono or stereo operation – "Mode"
PEAK PEAK Menu
0 0
Sensitivity
-10 -10
Mode
-20 -20
-30 -30
Easy Setup
-40 -40
Stereo
AF AF
Call up "Mute Mode"
PEAK PEAK Sensitivity
0 0
-10 -10
– 18 dB
-20 -20
-30 -30
-40 -40
AF AF
Select the desired
setting
"Stored"
"AF I" and/or "AF
"AF I" and/or "AF
PEAK PEAK Mode
0 0
-10 -10
Stereo
-20 -20
-30 -30
-40 -40
AF AF
Select the desired
setting
"Stored"
PEAK PEAK Sensitivity
0 0
-10 -10
– 18 – 15 dB dB
-20 -20
-30 -30
-40 -40
AF AF
Store the setting
II" shows full deflection for
II" shows full deflection
PEAK Mode
0
-10
Mono – 18 dB
-20
-30
-40
AF
Store the setting