3Ware 9650SE-2LPML User Manual page 68

Chapter 5. 3ware BIOS Manager 2 (3BM 2) Introduction
58
3 Press immediately to bring up the
Alt-3
Normally your 3ware configuration remains on-screen for just a few
seconds. However, if a unit has degraded, the screen indicates the
problem and remains on your screen longer.
4 If you have more than one 9000-series controller in your system, a screen
lists the available boards (see Figure 28). In this case, highlight the board
with which you want to work and press
Figure 28. AMCC Boards Selection Screen
You see a screen similar to the warning message below, warning you that
changing your disk array configuration may overwrite data on the disks.
5 If you plan to make changes to your configuration and need to backup
data before continuing, press
key to continue.
Figure 29. Warning Message When you Start 3BM
If 3BM detects a degraded array, a red message box appears, to alert you
to the problem. For information about rebuilding a degraded array, see
"Locating a Drive by Blinking Its LED" on page 161.
3ware BIOS Manager (3BM)
Enter .
and do so now. Otherwise, press any
ESC
3ware Serial ATA RAID Controller User Guide
.