3Ware 9650SE-2LPML User Manual page 286

Appendix B. Software Installation
276
10 [Optional] On the same 3DM 2 Security Configuration screen, you can
specify a different listening port than the default (888), if appropriate.
For more about this feature, see "Setting the Incoming Port #" on page 79.
When you are ready, click
Figure 111. 3DM2 Specify Listening Port
11 If you want the Installation Wizard to connect to 3DM 2 after you finish
the wizard, check the
3DM and configure a RAID unit right away.
If you do not want to connect to 3DM 2 at this time, leave the box
unchecked.
When you are ready, click
Figure 112. Final Installation Screen
to continue.
Next
box. This allows you to log into
Connect to 3DM2
Next to continue.
3ware Serial ATA RAID Controller User Guide