C Initialize Paused; D Verify Paused - 3Ware 9650SE-2LPML User Manual

Chapter 12. Troubleshooting

003C Initialize paused

003D Verify paused

250
Event Type
Information
Cause
The initialization is paused.
Initializations are normally paused for two (formerly ten) minutes after a
system first boots up. Initialization is also paused during non-scheduled times
when scheduling is enabled. Initializations follow the rebuild schedule.
Action
If you want the initialize to resume, you can disable or modify the schedule
through 3DM or CLI.
See Also
"Viewing Current Task Schedules" on page 157
"About Initialization" on page 143
Event Type
Information
Cause
The verify operation is paused.
Verifies are normally paused for 2 (formerly 10) minutes after a system first
boots up. Verifies are also paused during non-scheduled times when
scheduling is enabled.
Action
If you want the verification to resume, you can disable or modify the schedule
through 3DM or CLI
See Also
"About Verification" on page 146
"Scheduling Background Tasks" on page 156
3ware Serial ATA RAID Controller User Guide