Cancelling A Rebuild And Restarting It With A Different Drive - 3Ware 9650SE-2LPML User Manual

Chapter 9. Maintaining Units
Cancelling a Rebuild and Restarting It with a
Different Drive
154
Figure 65. Rebuild Option on the Maintain Menu
The Rebuild Disk Array screen displays.
Figure 66. Rebuild Disk Array Screen
5 Press to select the
Enter
You are returned to the main screen; "Rebuilding" appears next to the unit
you selected.
6 Press to save your changes and exit 3BM
F8
The unit will begin rebuilding about ten minutes after the operating
system finishes loading and the 3ware driver has loaded.
When you start a rebuild from 3BM, you cannot cancel from within the 3BM
interface. However, if you have hot-swap carriers, you can remove and
replace the drive, rescan the controller (Alt-R), and then select a new drive to
be used in the rebuild. You can also boot the operating system, launch 3DM,
button to continue.
OK
.
3ware Serial ATA RAID Controller User Guide