Deleting A Unit Through 3Bm - 3Ware 9650SE-2LPML User Manual

Chapter 8. Configuring Units

Deleting a Unit through 3BM

122
5 In the Unit Maintenance section of the Maintenance page, select the unit
you want to remove and click
6 When a message asks you to confirm, click
Configuration information associating the drives with the unit is deleted,
and the individual drives appear in the Available Drives list (Figure 55).
You can now use them as part of another unit, or designate them as
Spares, for use in a rebuild.
Figure 55. Unit Successfully Deleted through 3DM
In 3BM, the command for deleting a unit is on the main 3BM screen.
To delete a unit through 3BM
1 At the main 3BM screen, select the unit in the list of Exportable Units by
highlighting it and pressing
An asterisk appears in the left-most column to indicate that it is selected.
2 Tab to the Delete Unit
Note:
If you want to delete an incomplete drive or unusable unit, or a
drive that appears with a message such as "Unsupported DCB,"
select it in a similar manner and then select
though it appears in the list
Warning:
Backup any data that you want to keep.
Delete Unit .
Enter or Space
button and press Enter
Incomplete Drives and Others
Any data on the unit will be lost once the unit is deleted.
3ware Serial ATA RAID Controller User Guide
OK .
.
.
Delete Unit
, even
.