Related Manuals for 3Ware OpenSolaris
Summary of Contents for 3Ware OpenSolaris
- Page 1 ® 3ware SAS/SATA RAID User Guide Addendum Software for OpenSolaris™ Supports the 9690SA and 9650SE Models PN 720-0190-00 February 2009...
- Page 2 This publication may be copied or reproduced for reference purposes only. All other purposes require the express written consent of AMCC, 215 Moffett Park Drive, Sunnyvale, CA 94089. AMCC shall not be responsible or liable for, and shall be held harmless against, any and all damages, claims, and/or disputes that arise from the copying or reproduction of this publication.
- Page 3 Uninstalling 3ware Software Under OpenSolaris Note: The 9.5.1 release for OpenSolaris is a web-only release of the software, driver, and firmware. To install the driver and disk management tools you will need to download the complete codeset image file that supports OpenSolaris from http://3ware.com/support/index.asp...
-
Page 4: Related Documentation
“First-Time RAID Configuration Using 3BM” in the 3ware SAS/SATA RAID Software User Guide. You can also use the CLI to create RAID units. For details, see the 3ware SAS/SATA RAID Controller CLI Guide. 3ware® SAS/SATA RAID Software User Guide Addendum for OpenSolaris... -
Page 5: Driver And Software Installation
You must be root to run the installer. To install the driver and software Download the AMCC 3ware OpenSolaris installation image from http://3ware.com/support/index.asp and burn it to a CD-ROM disc. With your computer on, insert the CD you burned in step 1 and navigate to the folder on the CD that contains the installer. - Page 6 Figure 2. License Agreement Screen If you want to change where the components will be installed, you can change the path and directory. When you are ready, click Next Figure 3. Specify Directory Path Screen 3ware® SAS/SATA RAID Software User Guide Addendum for OpenSolaris...
- Page 7 Next Figure 4. Select Components to Install Screen • The AMCC 3ware OpenSolaris driver is required for the operating system to be able to interact with the 3ware RAID controller. (Installing the driver may require that you restart your computer.) •...
- Page 8 RAID units. Instructions for using 3BM are available in the 3ware SAS/SATA RAID Software User Guide. Instructions for using the CLI are available in 3ware SAS/SATA RAID Controller CLI Guide. 3ware® SAS/SATA RAID Software User Guide Addendum for OpenSolaris...
- Page 9 Driver and Software Installation Installing the Driver and Software from the Command Line The following steps describe how to install software on OpenSolaris at a command line, using a console application. You must be root to run the installer. To install the driver and software on OpenSolaris from the...
-
Page 10: Partitioning, Formatting And Mounting Units
Editing the sd.conf File in the OpenSolaris system documentation at: http://docs.sun.com/source/819-1274-13/appd_solaris.html#66564 Removing a Unit If you remove a unit through CLI, OpenSolaris will keep a record of the unit in the system cache until it is unconfigured through the devfsadm or cfgadm command. -
Page 11: Updating The Firmware
Uninstalling 3ware Software Under OpenSolaris The following steps describe how to uninstall software on OpenSolaris from the command line. If you do not use the -console option, the installer will assume you want GUI mode. You must be root to run the uninstaller.