3Ware 9650SE-2LPML User Manual page 108

Chapter 8. Configuring Units
98
2 After all drives for the unit are selected,
and press Enter .
Tip:
You can also press
3 On the 3ware Disk Array
listed.
Figure 47. Create Disk Array Display
4 (Optional) Press Enter
again to set the name.
5 to the
Tab RAID Configuration
available configurations for the number of drives you selected.
Figure 48. Configuration Choices for Four Drives
6 Use the
arrow keys
7 to the field
Tab Stripe Size
256 KB).
Figure 49. Stripe Sizes for a RAID 5
Tab
Alt-C
to choose Create Unit.
screen, make sure that the proper drives are
and type a name for the unit; then press
field and press
to select the configuration you want and press
and select the desired striping size (16, 64, or
3ware Serial ATA RAID Controller User Guide
to the button
Create Unit
Enter
to display a list of
Enter
Enter
.