Chapter 10. Maintaining Your Controller; Determining The Current Version Of Your 3Ware Driver - 3Ware 9650SE-2LPML User Manual

Maintaining Your Controller
Determining the Current Version of Your
3ware Driver
www.3ware.com
This section contains instructions for how to perform tasks that help you
maintain your controller, including:
•

Determining the Current Version of Your 3ware Driver

• Updating the Firmware and Driver
• Downloading the Driver and Firmware
• Updating the Firmware Through 3DM 2
• Viewing Battery Information
• Testing Battery Capacity
You can view controller and driver information in several different ways:
• Using 3DM 2 you can see both the driver and firmware versions (see the
"Controller Summary page" on page 187)
• Using 3BM you can see the firmware version (see "Displaying Controller
Information" on page 65)
• Using the CLI you can see both the driver and firmware versions (see
3ware Serial ATA RAID Controller CLI Guide)
• Under Linux, you can type the following command if you have a 2.4
kernel or earlier:
cat /proc/modules/scsi/3w-9xxx/*
where the asterisk (*) represents controller number and "9xxx" represents
the type of the controller.
If you have a 2.6 kernels with sysfs, type the following command:
cat /sys/class/scsi_host/<hostid>/stats
where <hostid> is usually host0, unless other SCSI devices are available,
in which case it may be host1 or higher.
10
163