Strap Tool Kit - Cisco 1240 Hardware Installation Manual

Contents of the Mounting Kits

Strap Tool Kit

When to Use
Use the tool in the Strap Tool Kit to attach the steel straps included in the band strap kit. Steel straps are
required to install the mounting plate on poles larger than 4.5 inches (11.4 cm) in diameter. For more
information, see the
The tool in the Strap Tool Kit is manufactured and supported by BAND-IT. For more information about
Note
the tool, see www.band-it-idex.com.
Figure 5-4
1
Item
1
2
Cisco 1240 Connected Grid Router Hardware Installation Guide
5-6
"Band Strap Kit" section on page
Strap Tool Kit Contents
Description
Strap tool
Strap tool documentation (not shown)
Chapter 5
5-5.
Mounting the Router
OL-26223-04