Band Straps; Strap Tool Kit - Cisco ASR 901S Series Installation Manual

Installing the Router
2
3

Band Straps

Use the band straps when you mount the router on a pole larger than 4.5 inches (11.4 cm) in diameter. These
straps are part of the
Figure 11: Band Straps
Item
1

Strap Tool Kit

Use the tool in the Strap Tool Kit to attach the steel straps included in the
straps are required to install the mounting plate on poles larger than 4.5 inches (11.4 cm) in diameter.
OL-29732-01
M8 x 12 screw 8
M8 spring 8
washer
Pole Mount Kit, on page 25
Qty.
2
Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide
Use this hardware to attach the wall mount bracket to the wall or to
the pole clamp bracket, and the router to the wall mount bracket.
Assemble the pole clamp bracket, pole clamp gusset, screw, and
washer as described in Assembling the Pole Clamp Bracket and the
Pole Clamp Gusset, on page
the pole clamp bracket onto the pole, as described in
Router onto a Pole, on page
the wall as described in Mounting the Router onto a Wall, on page
41.
and require the Strap Tool Kit, on page 29
Description
Steel straps
Band Straps
31. Use the included hardware to attach
Mounting the
34. Attach the wall mount bracket onto
for installation.
Band Straps, on page 29. Steel
29